OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B07

Electric/Auxiliary Transmission Fluid Pump Motor Phase W Current Low

P0B07 means phase W of the auxiliary fluid pump motor carries less current than commanded, the typical sign of an open W path. GM uses it on the Volt and later hybrids: below 1 A peak W-axis current for 0.4 s of 0.6 s, with the inverter in normal PWM above 50 V, sets a Type A fault. A GM service update for the 2017-18 Cadillac CT6 plug-in shows the code had been calibrated off; a W phase loss then shut the car down or prevented starting with no code and no MIL, until reprogramming of the drive motor power inverter module enabled P0B07 as Type A. On the 2014-15 Spark EV, bulletin PI1433 ties P0B01, P0B04 or P0B07 to an unlatched pump connector. P0B01 and P0B04 are phases U and V, P0B08 the high side, P0B06 the general W code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 07

Possible causes

  • Pump motor connector not fully seated or latched (Chevrolet Spark EV) high
  • Open circuit in the phase W lead or terminal medium
  • Outdated inverter software (Cadillac CT6 plug-in, service update 18199) medium
  • Open winding of phase W in the pump motor low

Symptoms

  • MIL and Service Vehicle Soon light
  • Loss of propulsion, vehicle shutdown or no-start

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0B07

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication