OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B05

Electric/Auxiliary Transmission Fluid Pump Motor Phase V Current High

P0B05 flags overcurrent in phase V of the electric auxiliary transmission fluid pump motor. No manufacturer publicly documents this specific code. GM monitors the same physical fault without naming the phase: P0C28 trips when any of U, V or W exceeds 35 A for about 10 ms within a 62 ms window, and a 2018 Cadillac CT6 plug-in service update shows how a faulty pump restart routine alone can push the current over that limit. Likely triggers for a V-specific high code are a short in the V lead, shorted turns, a seized or contaminated pump, or a restart against a stalled rotor. The Hitachi patent on sub-oil pump drives shows the phase currents come from a shared sensor. Auto-stop is usually blocked. P0B04 is the low side, P0B02 and P0B08 phases U and W.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 05

Possible causes

  • Phase V lead shorted to another phase or to ground high
  • Pump seized or contaminated, motor draws excess current medium
  • Pump restart logic in the inverter software causing overcurrent medium
  • Shorted turns in phase V of the pump motor low

Symptoms

  • MIL and transmission or hybrid warning
  • Loss of propulsion or no-start in severe cases

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0B05

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication