OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B04

Electric/Auxiliary Transmission Fluid Pump Motor Phase V Current Low

P0B04 indicates that phase V of the auxiliary fluid pump motor carries too little current, usually because the phase is open somewhere between inverter and winding. GM tests it on the Volt (2016) and in the 2018 and 2019 hybrid tables like its U and W siblings: in Run, with normal PWM, more than 50 V on the inverter and a minimum squared current command, the V current is sampled while the rotor sits within 30 degrees of the V axis. Under 1 A for 0.4 s out of 0.6 s (0.08 s windows in 2019) sets a Type A fault. GM bulletin PI1433 for the 2014-15 Spark EV names P0B04 with Service Vehicle Soon and reduced propulsion and points to the pump connector not being latched. P0B01 and P0B07 are phases U and W, P0B05 the high side, P0B03 the general V code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 04

Possible causes

  • Pump motor connector not fully seated or latched (Chevrolet Spark EV) high
  • Open circuit in the phase V lead or terminal medium
  • Phase V switch in the pump inverter not conducting medium
  • Open winding of phase V in the pump motor low

Symptoms

  • Service Vehicle Soon light and MIL
  • Reduced propulsion power or limited vehicle speed

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0B04

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication