P0B03
Electric/Auxiliary Transmission Fluid Pump Motor Phase V Current
P0B03 covers a general current fault in phase V of the brushless motor of the electric auxiliary transmission fluid pump. No manufacturer publicly describes a monitor for it. GM's 2013 eAssist (BAS Plus) tables name P0B03 only once, as a code that must be inactive before another speed check runs, without a description of its own. In GM's Volt and CT6 tables phase V is watched by the low-side code P0B04, and any overcurrent goes to P0C28. A GM, BMW and Daimler patent on a hybrid transmission pump explains why the pump matters: it must hold transmission pressure when the engine is stopped, otherwise gear engagement can be lost. The general code is a catch-all for implausible V current that fits neither low nor high. P0B04/P0B05 are the low and high variants, P0B00 and P0B06 phases U and W.
Possible causes
- Poor contact in the phase V lead or pump connector high
- Current sensing in the pump inverter faulty medium
- Phase V power stage in the pump control module faulty medium
- Winding fault in phase V of the pump motor low
Symptoms
- MIL or transmission/hybrid warning
- Engine auto-stop or electric mode no longer available
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0B03
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.