P0B00
Electric/Auxiliary Transmission Fluid Pump Motor Phase U Current
P0B00 is the general fault for phase U of the three-phase motor that drives the electric auxiliary transmission fluid pump, the pump that keeps line pressure while the engine is stopped. No manufacturer documents this exact code publicly. GM, which runs such pumps on the Volt, ELR, Spark EV and CT6, monitors phase U instead with the low-side code P0B01 and catches overcurrent on any phase with P0C28. A Hitachi patent for an idle-stop sub-oil pump shows that the inverter often derives every phase current from one DC-bus shunt, so a U fault may come from the shared sensor rather than the phase itself. Expect a warning lamp, a stopped pump and, depending on design, no engine auto-stop or a no-start. P0B01/P0B02 are the low and high variants, P0B03 and P0B06 phases V and W.
Possible causes
- Loose, corroded or unlatched phase U connection at the pump motor high
- Current sensing in the pump inverter faulty (shunt or phase sensor) medium
- Power stage of phase U in the pump control module faulty medium
- Winding fault in phase U of the pump motor low
Symptoms
- MIL or hybrid/transmission warning message
- Engine auto-stop disabled or no electric drive mode
- Delayed engagement or harsh restart after a stop
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0B00
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.