P0AFF
System Voltage Too Low for Voltage Step Down Conversion
A step-down (buck) DC/DC converter, often called the accessory power module, supplies the 12 V system from the high-voltage or 48 V bus. To regulate its output it needs an input voltage above a minimum. P0AFF is set when the input system voltage is too low for this conversion, so the converter cannot hold its 12 V output. No manufacturer documents this exact code publicly. GM monitors the related function in its 2013 eAssist table: P0CA2 flags a step-down failure of the 14 V power module after a shoot-through fault in its switching device, one trip, Type A. CARB requires such hybrid components to be monitored. Expect a charging system warning and a slowly draining 12 V battery.
Possible causes
- High-voltage or 48 V bus voltage too low (discharged pack, open contactor) high
- High-resistance input connection or fuse of the DC/DC converter medium
- DC/DC converter internal measuring fault low
Symptoms
- Battery or charging system warning light
- 12 V battery discharges, electrical consumers fail
- Hybrid or start-stop functions restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AFF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.