OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AFE

Hybrid/EV Battery System Voltage Too Low for Voltage Step Up Conversion

Many hybrids raise the battery voltage with a step-up (boost) converter before it reaches the inverters; Toyota's second-generation Hybrid Synergy Drive, for example, boosts a pack of around 200 V to 500 V or more. The converter needs a minimum input voltage to reach its target without excessive current. P0AFE is set when the battery-side voltage is below that minimum, so the converter cannot boost properly. No manufacturer documents this exact code publicly; CARB requires hybrid components such as converters to be monitored for functional faults. A deeply discharged or weak pack, a high-resistance connection or a voltage measurement fault are the obvious suspects. Expect reduced electric assist; a low pack voltage is reported separately as P0AFA.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / FE

Possible causes

  • Pack deeply discharged or weak under load high
  • High-resistance connection between battery and converter medium
  • Converter input voltage measured too low low

Symptoms

  • Hybrid system warning
  • Reduced acceleration and electric assist
  • Engine runs more often than usual

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AFE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication