OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AFD

Hybrid/EV Battery Pack Temperature Too Low

P0AFD indicates that the traction battery is colder than its permitted operating range. At very low temperatures cell resistance rises and charging risks lithium plating, so the controller restricts or blocks charging and discharging. No manufacturer documents this exact code publicly. As a related case, GM's bulletin 18-NA-342 describes a Chevrolet Volt showing Battery Too Cold, Plug in to Warm above -25 °C because of faulty temperature sensor readings, fixed by reprogramming. CARB requires hybrid battery temperature inputs and their plausibility to be monitored. Distinguish a genuinely cold pack, which warms up on the charger or through the battery heater, from a sensor or heater fault; sensor circuit faults have their own codes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / FD

Possible causes

  • Vehicle parked unplugged in extreme cold high
  • Battery heater or coolant heater not working medium
  • Temperature sensor reading too cold (sensor or software) medium

Symptoms

  • Battery too cold message in the cluster
  • Reduced electric power or electric drive unavailable
  • Charging slow or not possible until the pack warms up

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0AFD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication