OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AF8

Hybrid/EV Battery System Voltage

P0AF8 compares the battery pack voltage reported by the battery controller with an independent measurement on the high-voltage bus. GM calls it system voltage correlation: with the contactors closed, the 2019 tables fail it when the pack reading differs from the inverter bus voltage by more than 13.95 V, or from the charger bus voltage by more than 14.95 V, 400 of 500 samples at 25 ms, Type A. The 2011 Volt table uses 12 V and Type A, the 2013 eAssist table 5.77 V against the motor controller, Type B. GM's Saturn Vue Hybrid PIP4005A links P0AF8 with P0AFB to a loose negative battery cable, and Volt PIC6089B mentions it with low 12 V system faults. P0AFA and P0AFB judge the voltage level itself.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / F8

Possible causes

  • Loose or arcing high-voltage battery cable connection high
  • Pack or bus voltage sensing circuit inaccurate medium
  • Low 12 V supply or loose 12 V power fuse affecting the measuring modules medium
  • High resistance in a pack fuse or main contactor low

Symptoms

  • MIL and hybrid or EV warning on
  • Battery saver or low battery message
  • Intermittent no crank or reduced hybrid power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AF8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication