OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AF7

14 Volt Power Module Internal Temperature Too High

The 14 V power module is the DC/DC converter that feeds the 12 V network from the high-voltage battery in hybrids and EVs. P0AF7 reports that its internal temperature has exceeded the protection limit, a real overheat rather than a sensor circuit fault. No manufacturer documents this exact code publicly. GM's 2013 eAssist table shows how the same module is watched: its Accessory Power Module has two temperature sensors with their own circuit codes, and the separate code P0C32 compares sensor 1 with a thermal model and fails if they differ by more than 15 °C. CARB requires monitoring of hybrid components. Common causes are a blocked cooling path, a weak coolant pump or fan, or a constantly high 12 V load. The module then derates its output, so the 12 V battery may run down.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / F7

Possible causes

  • Restricted cooling, weak coolant pump or failed cooling fan high
  • Sustained high 12 V load or weak 12 V battery medium
  • Internal fault of the DC/DC converter low

Symptoms

  • Warning lamp or 12 V charging warning
  • Low 12 V voltage, flickering lights
  • Comfort consumers switched off

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AF7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication