P0AF6
Drive Motor Inverter Temperature Sensor B Circuit Intermittent/Erratic
P0AF6 targets an inverter temperature sensor B signal that jumps or drops out briefly. Since the heat sink of the motor B inverter is liquid-cooled and warms or cools gradually, abrupt changes in the reading indicate a contact problem or an intermittent fault in the sensing circuit rather than real temperature. No manufacturer documents this exact code publicly; GM's hybrid tables only list P0AF3, P0AF4 and P0AF5 for sensor B. For erratic battery temperature sensors such as P0AEC, GM sums the signal changes over 10-sample windows and fails after 4 of 5 bad windows, a likely model for this check. CARB requires sensor inputs of hybrid systems to be checked for erratic behaviour. Watch live data while gently moving the inverter harness.
Possible causes
- Loose or corroded connector at the inverter module high
- Intermittent fault inside the power inverter module medium
- Electrical interference on the sensor signal low
Symptoms
- Warning lamp that comes and goes
- Brief reductions of motor B power
- Jumping inverter temperature in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AF6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.