P0AF5
Drive Motor Inverter Temperature Sensor B Circuit High
P0AF5 means inverter temperature sensor B delivers a voltage above its valid range. For GM's NTC sensor that equals an implausibly cold inverter, so an open circuit, a lost ground or a cracked thermistor is likely. In GM's 2016 to 2019 tables the code sets below -50 °C for 2.6 of 3.65 s, but only once the inverter has run at least 90 s at 20 Nm or more, which rules out a genuinely cold start; Type B, two trips. The 2011 Volt uses below -58 °C with Type A, one trip; the 2011 and 2013 two-mode trucks use below -40 °C, Type B. Until the value is valid, the controller protects inverter B with substitute values and may reduce motor B power. Check connectors at the inverter before condemning the unit.
Possible causes
- Open sensor or circuit inside the power inverter module high
- Loose, corroded or unplugged connector at the inverter medium
- Lost sensor ground low
Symptoms
- Malfunction indicator lamp after two trips
- Reduced motor B power
- Implausibly cold inverter temperature in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AF5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.