P0AF1
Drive Motor Inverter Temperature Sensor A Circuit Intermittent/Erratic
P0AF1 is meant for an inverter temperature sensor A signal that jumps or drops out briefly instead of failing permanently. Inverter heat sinks are liquid-cooled and change temperature smoothly, so sudden steps point to a contact problem or an internal fault in the sensing circuit. No manufacturer documents this exact code publicly; GM's hybrid tables cover sensor A only with the plausibility, low and high codes P0AEE, P0AEF and P0AF0. GM's method for erratic battery sensors, such as P0AEC, sums signal changes over 10-sample windows and fails after 4 of 5 bad windows, which shows how such a check usually works. CARB requires hybrid sensor inputs to be monitored for this kind of fault. Freeze-frame data help, since the fault often comes and goes.
Possible causes
- Loose or corroded connector at the inverter module high
- Intermittent fault inside the power inverter module medium
- Electrical interference on the sensor signal low
Symptoms
- Warning lamp that comes and goes
- Brief power reductions while driving
- Jumping inverter temperature in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AF1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.