P0AF0
Drive Motor Inverter Temperature Sensor A Circuit High
P0AF0 reports a signal from inverter temperature sensor A above its valid range, which for an NTC sensor reads as an extremely cold inverter: open wire, lost ground or a broken sensor. GM's 2016 to 2019 hybrid tables set it below -50 °C for 2.6 of 3.65 s, but only after at least 90 s of inverter warm-up at 20 Nm or more, so a really cold car does not trigger it; Type B, two trips. The 2011 Volt uses below -58 °C (Type A), eAssist below -70 °C and the two-mode trucks below -40 °C (Type B). Kia's 2025 Sorento Hybrid bulletin lists P0AF0 with P0A3C and P1B77 after intermittent motor operation during engine clutch learning and fixes it with a motor control unit update.
Possible causes
- Open sensor or circuit inside the power inverter module high
- Motor control unit software (Kia Sorento Hybrid 2025) medium
- Loose or corroded connector at the inverter low
Symptoms
- Malfunction indicator lamp and hybrid warning
- Reduced electric drive power
- Traction motor noise or inoperative A/C (Kia)
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AF0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG02 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2011/11OBDG01 HYBRID Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG05C Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG06 Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2024/MC-11012057-0001.pdf