OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AEE

Drive Motor Inverter Temperature Sensor A Circuit Range/Performance

P0AEE checks whether inverter temperature sensor A reads sensibly. GM's 2016 to 2019 tables compare it after a cold soak with an average temperature of the vehicle; more than 20 °C apart sets Type B, two trips. The 2011 Volt compares it with the other power electronics sensors (20 °C, Type A), the 2013 two-mode trucks after 360 minutes off (15 °C), eAssist with module and MGU temperatures (20 °C). GM bulletin PIC6303A notes that on Volt, Malibu and LaCrosse with 5ET50 the code alone triggers no remedy; the inverter is only replaced with P0AC4. Audi fixes P0AEE00 on Q5 and A7 e quattro by software, and Honda lists it among inverter faults of the 2012-15 Civic Hybrid with extended warranty.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / EE

Possible causes

  • Controller software error (Audi Q5/A7 e quattro bulletin) medium
  • Inverter temperature sensor A drifting out of tolerance medium
  • Failing power inverter module (e.g. Honda MPI solder joints) medium
  • Uneven inverter cooling after soak low

Symptoms

  • Malfunction indicator lamp, often without drivability change
  • Drive system fault warning (Audi)
  • Vehicle may not start in hybrid mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AEE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication