P0AEC
Hybrid/EV Battery Temperature Sensor D Circuit Intermittent/Erratic
P0AEC flags erratic behaviour of battery temperature sensor D: the reading jumps faster than the heavy battery mass could ever warm or cool. GM documents the method in its 2016 and 2019 hybrid tables. The controller sums the absolute changes of the sensor value across a 10-sample window taken every 100 ms; a sum above 10 fails the window, and 4 failed windows out of 5 store the code as Type B, two trips. GM applies the same logic to sensors A to C. The older two-mode and eAssist tables list no erratic code for sensor D. Typical culprits are a loose terminal, a partly broken wire or a connector not fully latched after pack service. If several sensors jump at once, suspect the sensing board rather than the individual thermistor.
Possible causes
- Loose terminal or connector not fully latched at sensor D high
- Partly broken or chafed sensor wire medium
- Fault on the battery sensing board low
Symptoms
- Malfunction indicator lamp after two trips, may go out again
- Jumping battery temperature in live data
- Occasional power limitation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AEC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.