OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AEB

Hybrid/EV Battery Temperature Sensor D Circuit High

P0AEB reports that battery temperature sensor D delivers a voltage above its valid range. For GM's NTC sensors this reads as extreme cold, pointing to an open wire, a backed-out pin at the sensing board or a cracked thermistor. GM's 2016 and 2019 tables set it below -69 °C in 8 of 10 samples, the 2011 and 2013 two-mode hybrids below -45 °C in 30 of 40, the eAssist table 13OBDG05C above 4.63 V, about -45 °C, in 7 of 10, and a 2018 controller below -40 °C for 1.4 s within 2 s; all Type B, two trips. On the Chevrolet Volt, bulletin 18-NA-342 links such codes to a Battery Too Cold message above -25 °C ambient and prescribes reprogramming. A pack the controller believes frozen gets strict charge and power limits.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / EB

Possible causes

  • Open circuit or unplugged connector at sensor D high
  • Outdated controller software (GM Volt, bulletin 18-NA-342) medium
  • Temperature sensor D open internally medium

Symptoms

  • Malfunction indicator lamp after two trips
  • Battery Too Cold message (Volt)
  • Charging and electric drive restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AEB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication