OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AE9

Hybrid/EV Battery Temperature Sensor D Circuit Range/Performance

P0AE9 is the plausibility check for battery temperature sensor D, GM's sensor 4: its reading is compared with the other pack sensors. In GM's 2016 and 2019 tables it fails when the value is more than 25 °C away from the average of the others in 50 of 67 samples; the two-mode hybrid tables of 2011 and 2013 use more than 15 °C in 90 of 100; the eAssist table 13OBDG05C allows 8.55 °C after a long module off time; GM's 2018 table uses 20 °C for 5 s within 6.7 s. All are Type B, two trips. Volt bulletin 18-NA-342 counts P0AE9 among sensor codes that set falsely in cold weather and fixes them by reprogramming. Otherwise a drifting sensor or a real hot spot in one module is the likely cause.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / E9

Possible causes

  • Outdated controller software (GM Volt, bulletin 18-NA-342) medium
  • Temperature sensor D drifting out of tolerance medium
  • Genuine local temperature difference in one battery module low
  • Increased contact resistance in the sensor circuit low

Symptoms

  • Malfunction indicator lamp after two trips
  • Battery Too Cold message despite mild weather (Volt)
  • Reduced charge and electric drive power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AE9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication