OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AE8

Hybrid/EV Battery Temperature Sensor D Circuit

Battery temperature sensor D is a further thermistor inside the high-voltage pack; GM's Volt bulletin 18-NA-342 lists the matching codes as temperature sensor 4 of nine. P0AE8 is the general circuit code for it, used when the controller finds an electrical fault without classifying it as low, high or erratic. No manufacturer documents this exact code publicly; GM's hybrid tables report the more specific siblings P0AE9 to P0AEC instead. CARB requires temperature inputs of hybrid batteries to be monitored for circuit faults. With one value missing, the controller has a gap in its temperature picture and usually limits charge and discharge power. The sensor sits on a module or sensing board inside the pack, so checks require high-voltage safety procedures.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / E8

Possible causes

  • Poor contact or damaged wire between sensor D and sensing board high
  • Temperature sensor D failed medium
  • Fault in the battery controller input stage low

Symptoms

  • Hybrid system or check engine warning
  • Reduced electric power and regeneration
  • Further battery sensor codes may be stored

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AE8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication