P0AE5
Hybrid/EV Battery Precharge Contactor A Control Circuit Range/Performance
P0AE5 reports that the precharge function works electrically but does not deliver the expected result, so the controller judges the circuit implausible. Ford documents it in special service message SSM 47129: 2013-18 C-MAX and Fusion Hybrid and Energi models and the MKZ Hybrid may not start, with P0AE5 stored in the battery energy control module. When pinpoint tests show that the DC/DC converter, the cabin coolant heater or the A/C compressor has a low internal resistance on its high-voltage side, Ford replaces only that component, not the battery junction box. A load that drags the bus down keeps the precharge from reaching its target. Open, low and high driver faults are P0AE4, P0AE6 and P0AE7.
Possible causes
- High-voltage consumer with low internal resistance (DC/DC converter, coolant heater, A/C compressor) high
- Precharge resistor degraded or wrong value medium
- Precharge contactor responding slowly or with high contact resistance low
Symptoms
- Vehicle does not start or become ready
- Red warning triangle or hybrid warning in the cluster
- Possible additional codes from the faulty high-voltage consumer
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AE5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.