P0ADE
Hybrid/EV Battery Negative Contactor Control Circuit Range/Performance
P0ADE is set when the coil circuit of the negative main contactor works electrically but its values are implausible, such as coil current or hold voltage out of range or a slow response after the command. No manufacturer publicly documents this code; GM, whose tables cover the negative contactor driver codes P0ADD, P0ADF and P0AE0 in detail, does not use P0ADE. CARB 1968.2 requires rationality and functional checks on hybrid output components. The contact-side faults P0AA4 (stuck closed) and P0AA5 (stuck open) are separate diagnoses. Possible effects are an intermittent failure to reach ready mode or charge.
Possible causes
- High resistance in coil wiring or connector high
- Negative contactor coil degraded medium
- Weak 12 V battery during start-up medium
- Battery controller fault or software low
Symptoms
- Vehicle will not enter ready mode or start
- Hybrid or EV warning light and check engine light
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ADE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.