P0ADA
Hybrid/EV Battery Positive Contactor Control Circuit Range/Performance
P0ADA describes a positive contactor coil circuit that is electrically present but does not behave plausibly: coil current, voltage or response time outside the expected window, for instance due to high resistance or an unstable PWM hold signal. No manufacturer publicly documents this code; GM, which details the positive contactor driver codes P0AD9, P0ADB and P0ADC with Type B logic and sample counters, does not list P0ADA. CARB 1968.2 requires functional and rationality checks of hybrid output components. It must be separated from the contact-side codes P0AA1 (stuck closed) and P0AA2 (stuck open). Drivers may see intermittent no-start or loss of ready mode.
Possible causes
- High resistance in coil wiring or connector (corrosion, fretting) high
- Contactor coil degraded or partially shorted medium
- Low 12 V supply during contactor closing medium
- Battery controller fault or software low
Symptoms
- Vehicle will not enter ready mode or start
- Hybrid or EV warning light and check engine light
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ADA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.