P0AD6
Hybrid/EV Battery Pack Air Flow Valve A Control Circuit Range/Performance
P0AD6 flags that the air flow valve A of the battery cooling does not behave as expected: the circuit is intact, but position, travel or the learned end stops do not fit the command. Audi documents exactly this code as P0AD600 on the 2012-15 Q5 hybrid (TSB 2038152): a software error made the battery management module J841 lose the learned end stops of the air supply valve, electric and hybrid drive were disabled, and a software update to version 0543 fixed it. CARB 1968.2 calls for functional monitoring of battery thermal management. Pure circuit faults are P0AD5, P0AD7 and P0AD8. Besides software, a sticking flap or a slipping actuator can cause it.
Possible causes
- Battery controller software loses learned end stops (Audi Q5 hybrid, fixed by update) high
- Flap binding from dirt or a deformed duct medium
- Actuator gears or position feedback worn medium
- End stops not relearned after battery or actuator work low
Symptoms
- Hybrid drive system error message in the cluster
- Electric and hybrid operation no longer available
- Check engine light on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0AD6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.