OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AD5

Hybrid/EV Battery Pack Air Flow Valve A Control Circuit/Open

Some air-cooled battery packs route their cooling air through a motorized flap that switches between cabin air, recirculation or an outlet. P0AD5 means the battery controller finds the drive circuit of this valve A open or otherwise faulty. No manufacturer publicly documents P0AD5; the same component appears in Audi's Q5 hybrid (2012-15) bulletin, where the battery management module J841 works with the learned end stops of the air supply valve in the cooling module. CARB 1968.2 requires electrical monitoring of all battery thermal management outputs. Sibling codes are P0AD6 (range/performance), P0AD7 (low) and P0AD8 (high). The flap stays where it is, and the controller may cut electric operation.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / D5

Possible causes

  • Loose or corroded connector at the flap actuator high
  • Broken wire in the actuator harness medium
  • Actuator motor winding open medium
  • Output stage in battery controller defective low

Symptoms

  • Hybrid warning, electric drive may be switched off
  • Check engine light on
  • Battery temperature not controlled as usual

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0AD5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication