P0AD0
Hybrid/EV Battery Pack Cooling Fan 3 Performance/Stuck Off
P0AD0 is a functional fault: the control line of battery fan 3 may be electrically fine, but the blower does not deliver what was commanded, or stays still. Depending on design, the controller compares fan speed feedback with the request, or, as a Honda patent describes, compares the expected battery temperature change for the known cooling capacity with the measured one. CARB asks for such a functional check of the battery cooling where feasible. No manufacturer publicly documents P0AD0 itself; circuit faults of the same fan are P0ACF, P0AD2 and P0AD3, the opposite case is P0AD1. The driver usually sees a hybrid warning and reduced power on hot days.
Possible causes
- Fan intake or duct blocked by dirt, pet hair or objects (often under or beside a seat) high
- Worn bearings or debris slowing the fan wheel medium
- Speed feedback signal from fan 3 missing or implausible medium
- Weak 12 V supply or poor ground at the fan low
Symptoms
- Hybrid or EV system warning light
- Power or regeneration limited after longer drives or in heat
- Battery temperature rises faster than usual
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0AD0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.