OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0ACF

Hybrid/EV Battery Pack Cooling Fan 3 Control Circuit/Open

Air-cooled traction batteries can use several blowers; P0ACF belongs to the third one and means the battery controller sees an open or otherwise invalid control line while it drives fan 3. CARB 1968.2 (e)(15.2.3)(B) requires the electrical inputs and outputs of the battery thermal management to be monitored like other comprehensive components. No manufacturer publicly documents this code; GM shows the method on fan 1 (P0A81): it checks the control voltage on the driver output and needs 16 failures before a Type B code is stored. Fan 1 and fan 2 have their own sets P0A81 and P0A96. Without the third blower the pack heats up faster, and power is limited.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / CF

Possible causes

  • Loose, corroded or unplugged connector at fan 3 high
  • Broken control wire between battery controller and fan 3 medium
  • Fan motor or its built-in driver open internally medium
  • Fan output stage in the battery controller defective low

Symptoms

  • Hybrid or EV system warning light, often with check engine light
  • Electric drive power reduced when the battery gets warm
  • No fan noise from the battery area when cooling is expected

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0ACF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication