P0ACE
Hybrid/EV Battery Temperature Sensor C Circuit Intermittent/Erratic
P0ACE flags erratic behaviour of battery temperature sensor C, meaning the reading jumps faster than the heavy battery mass could ever warm or cool. In GM's 2016 and 2019 hybrid tables the controller sums the absolute changes of the sensor value across a 10-sample window taken every 100 ms; a sum above 10 fails the window, and 4 failed windows out of 5 store the code as Type B, two trips. This is the same logic GM uses for sensors A and B. The older two-mode and 2013 programs do not list an erratic code for sensor C. Typical culprits are a loose terminal, a partly broken wire or a connector not fully latched after pack service. Several jumping sensors at once point to the sensing board.
Possible causes
- Loose terminal or unlatched connector at sensor C high
- Partly broken sensor wire inside the pack medium
- Fault on the battery sensing board affecting several inputs low
Symptoms
- Hybrid warning light that appears intermittently
- Sensor C value jumps in live data
- Occasional power limitation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ACE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.