OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0ACB

Hybrid/EV Battery Temperature Sensor C Circuit Range/Performance

With P0ACB the controller judges battery temperature sensor C implausible: its value deviates too far from what the other pack sensors report. GM applies the same limits as for sensors A and B. In the 2016 and 2019 tables the threshold is more than 25 °C away from the average of the other sensors in 50 of 67 samples; the 2011 and 2013 two-mode tables use more than 15 °C in 90 of 100; the 2013 table 13OBDG05C uses 8.55 °C after a soak of more than 6 hours. All are Type B, two trips. The Volt bulletin 18-NA-342 includes P0ACB among codes corrected by software. Without a bulletin, compare all sensors after an overnight soak to see whether only sensor C stands out.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / CB

Possible causes

  • Sensor C drifted from its characteristic high
  • Controller software flags the sensor falsely (GM Volt bulletin 18-NA-342) medium
  • Corroded terminal adding resistance medium
  • Real temperature difference in the module monitored by sensor C low

Symptoms

  • Check engine or hybrid warning light
  • Sensor C reads clearly off the others after a long soak
  • Possibly reduced charge and drive power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0ACB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication