P0AC9
Hybrid/EV Battery Temperature Sensor B Circuit Intermittent/Erratic
P0AC9 catches a battery temperature sensor B signal that changes erratically. Pack temperatures move slowly because of the large thermal mass, so rapid swings point to a bad connection. GM documents the method in its 2016 and 2019 hybrid tables: the controller integrates the absolute change of the sensor value over a 10-sample window at 100 ms per sample; a window fails when the sum exceeds 10, and the code sets after 4 of 5 failed windows, Type B, two trips. The older two-mode and 2013 tables have no erratic code for this sensor. The fault is often intermittent and may clear by itself, so check connector locking and terminal tension at the sensing board.
Possible causes
- Loose terminal or unlatched connector at the sensing board high
- Partly broken sensor wire inside the pack medium
- Interference from high-voltage switching on the sensor line low
Symptoms
- Hybrid warning light that comes and goes
- Sensor B value jumps in live data
- Occasional power limitation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AC9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.