P0AC6
Hybrid/EV Battery Temperature Sensor B Circuit Range/Performance
P0AC6 is the plausibility test for battery temperature sensor B: its reading is compared with the other pack sensors. GM documents several calibrations. The 2016 and 2019 tables fail it when the sensor differs from the average of the other sensors by more than 25 °C, 50 of 67 samples; the two-mode hybrid tables of 2011 and 2013 use more than 15 °C, 90 of 100 samples; GM's 2013 table 13OBDG05C allows 8.55 °C after more than 6 hours off. All are Type B, two trips. Bulletin 18-NA-342 for the Chevrolet Volt lists P0AC6 among false sensor codes in cold weather and fixes them by reprogramming. Otherwise a drifting sensor or a real local hot spot in a module is likely.
Possible causes
- Controller software flags the sensor falsely (GM Volt bulletin 18-NA-342) medium
- Sensor B drifted from its characteristic high
- Corroded contact adding resistance in the sensor circuit medium
- Real temperature difference from a weak cell or blocked cooling low
Symptoms
- Check engine or hybrid warning light
- One sensor reading far off the others in live data
- Battery too cold message on the Volt in mild weather
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0AC6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG02 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG02 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG06 Hybrid Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2013/13OBDG05C Hybrid Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2018/MC-10155116-9999.pdf