P0AC4
Hybrid/EV Powertrain Control Module Requested MIL Illumination
In many hybrids the hybrid powertrain controller has its own emission-related diagnostics but does not drive the malfunction indicator lamp itself. When it detects such a fault it sends a MIL request to the engine controller, which then stores P0AC4 as a pointer. GM documents this in its 2011, 2013, 2016 and 2019 hybrid tables: the engine controller watches the request message continuously once 3 seconds have passed after power-up and logs P0AC4 after one trip, listed as Type A but marked No MIL because the lamp is owed to the original fault. The real cause is therefore stored in the hybrid controller and must be read there. P0A7B is the equivalent request from the battery energy control module.
Possible causes
- Emission-related fault stored in the hybrid controller high
- Request still present because codes were cleared only in the engine controller low
Symptoms
- Check engine light on (caused by the underlying hybrid fault)
- Further codes present only in the hybrid controller
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0AC4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.