P0ABD
Hybrid/EV Battery Pack Voltage Sense A Circuit High
The counterpart to P0ABC: the pack voltage reading is above the highest value the battery could physically reach, which suggests an open reference, a failed divider or a damaged input rather than real overcharging. GM's 2016 and 2019 hybrid tables set P0ABD above 392 V, again with 8 failed samples out of 10 at 25 ms intervals and Type A, so the MIL comes on immediately. For the smaller pack in its 2013 table the limit is 190.1 V, with 7 of 10 samples and Type B. Range and plausibility problems are reported by P0ABB, the low limit by P0ABC. The vehicle typically limits or blocks electric operation until the fault is cleared.
Possible causes
- Open ground or reference side of the sense circuit high
- Voltage divider component failed in the battery controller medium
- Battery controller measurement input defective low
Symptoms
- Hybrid system or check engine warning on
- Electric drive limited or unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ABD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.