P0ABB
Hybrid/EV Battery Pack Voltage Sense A Circuit Range/Performance
P0ABB is a plausibility check: the measured pack voltage is within electrical limits but does not agree with what the individual cells add up to. GM documents it in several hybrid tables. From 2016 the battery controller flags it when pack voltage and the sum of cell voltages differ by more than 10 V in 32 of 40 samples; the 2013 table compares the pack reading with 32 times the average cell voltage and uses a 5.49 V limit. Both are Type B, so the MIL needs two trips. The check is suppressed while cell voltage circuit faults are active. P0ABC and P0ABD cover hard low or high readings, P0AF8 compares the pack sensor with the inverter bus voltage.
Possible causes
- Pack voltage measurement drifted (divider or input aging) high
- Faulty cell voltage tap distorting the cell sum medium
- High-resistance busbar or sense connection medium
Symptoms
- Check engine or hybrid system warning light
- Erratic state-of-charge display
- Reduced electric power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ABB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.