P0ABA
Hybrid/EV Battery Pack Voltage Sense A Circuit
The battery management system measures the total voltage of the high-voltage pack through a dedicated sense circuit and uses it for state of charge, power limits and contactor checks. P0ABA is the general circuit fault for sense circuit A, set when the reading is unusable without being clearly low, high or erratic. No manufacturer documents this exact code publicly; GM, for instance, monitors the same circuit with the more specific P0ABB to P0ABD. CARB requires hybrid battery inputs that feed emission-relevant control to be checked for circuit faults. Expect a warning light and reduced hybrid assistance, because the controller then works with conservative limits.
Possible causes
- Damaged or loose voltage sense lead inside the battery pack high
- Measurement input of the battery controller defective medium
- Blown sense fuse or failed divider resistor low
Symptoms
- Check engine or hybrid system warning light
- Reduced electric assist or EV range
- Vehicle may not enter ready mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ABA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.