P0AB9
Hybrid/EV System Performance
Despite the broad title, GM uses P0AB9 for one concrete check: a failed engine auto-start or auto-stop in its hybrids, including an engine stall during that process. In the 2016 and 2019 hybrid tables the hybrid controller sets the code when the engine still reports no torque about 15 seconds into an auto-start although more than 20 Nm is commanded, provided fuel level is sufficient and no cam or crank fault is present. The 2011 and 2013 tables describe the same idea with a stall during start/stop. GM rates it Type A, so the MIL comes on after one trip. Other faults that prevent starting, such as P0A0F, point at more specific causes; P0AB9 itself is the symptom.
Possible causes
- Fuel delivery problem (weak pump, nearly empty tank, clogged filter) high
- Ignition or injector fault that prevents the engine from firing medium
- Starter-generator or motor unable to spin the engine to start speed medium
- Controller software needing an update low
Symptoms
- Check engine light on
- Engine hesitates, fails or stalls when restarting at a stop
- Auto-stop disabled for the rest of the trip
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0AB9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.