P0AB7
Engine Mount B Control Circuit Low
P0AB7 means the engine controller sees the control line of active engine mount B pulled too low, the usual signature of a short to ground or an actuator coil with too little resistance. Ford's 2020-23 gasoline OBD summary lists it among the active-mount checks for bank 2: the output driver flags the fault continuously and the PCM matures it within roughly 5 seconds. Honda describes the code on the 2008 Pilot as a low-current fault in the rear mount actuator circuit. P0AB6 covers the open circuit, P0AB8 the high side, and P0A15 the same fault on mount A. The driver usually feels more engine shake at idle; drivability is otherwise unaffected.
Possible causes
- Control wire chafed through and shorted to ground high
- Mount solenoid coil shorted internally medium
- Water ingress in the mount connector medium
Symptoms
- Check engine light on
- Increased vibration felt through seat and steering wheel at idle
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0AB7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.