P0AB5
Hybrid/EV Battery Pack Air Temperature Sensor B Circuit Intermittent/Erratic
P0AB5 is set when the signal of battery air temperature sensor B fluctuates in a way real air temperature cannot, typically from an intermittent contact. No manufacturer documents this exact code publicly; GM's two-mode tables, which use sensor B as the outlet air sensor, list only P0AB2 to P0AB4. As an analogy, GM's 2019 table judges the battery cell sensor code P0A9F by summing signal changes within 10-sample windows, failing after 4 of 5 bad windows, Type B. CARB requires hybrid temperature inputs to be checked for erratic behaviour. The fault often comes and goes with vibration or temperature. Move the outlet-side harness while watching live data to locate the weak point.
Possible causes
- Loose or corroded terminal at sensor B high
- Partly broken wire near the outlet duct medium
- Interference coupled into the sensor line low
Symptoms
- Hybrid warning light that appears intermittently
- Outlet air value jumps in live data
- No noticeable driving change in most cases
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0AB5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.