OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AB2

Hybrid/EV Battery Pack Air Temperature Sensor B Circuit Range/Performance

P0AB2 checks whether air temperature sensor B reads sensibly. GM uses it on the full-size two-mode hybrids, where sensor B measures outlet air: in the 2011 and 2013 tables, with the battery fan commanded on, the outlet air may not be more than 10 °C warmer than the hottest battery module, 90 of 100 samples, Type B, two trips. The logic is simple physics: air leaving the pack cannot be much hotter than the modules that heated it. The test is skipped while module sensor or fan faults are present. A drifting thermistor, a sensor that has slipped out of the air stream or a faulty module sensor can trigger it. Unlike P0AB3 and P0AB4, the circuit itself is electrically in range.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / B2

Possible causes

  • Outlet air thermistor drifted from its characteristic high
  • Sensor displaced from its position in the air duct medium
  • Battery module temperature sensor used for comparison reads wrong medium
  • Corroded contact adding resistance low

Symptoms

  • Hybrid or check engine warning light
  • Outlet air reads clearly above module temperatures in live data
  • Usually no change in driving behavior

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0AB2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication