P0AB1
Hybrid/EV Battery Pack Air Temperature Sensor B Circuit
Air temperature sensor B is a second thermistor in the battery cooling air path; in GM's two-mode hybrid tables it is the outlet air sensor behind the modules. P0AB1 is the general circuit code for it, used when the controller sees an electrical fault without sorting it into low, high or erratic. No manufacturer documents this exact code publicly; GM reports the siblings P0AB2 to P0AB4 instead. CARB requires temperature inputs of hybrid components to be monitored for circuit faults. Without a valid outlet value the controller cannot judge how much heat the air carries away, so it usually falls back to a default fan strategy and may limit battery power. Inspect the outlet-side connector and wiring first.
Possible causes
- Damaged wiring or poor contact at the outlet air sensor high
- Air temperature sensor B failed medium
- Battery controller input circuit fault low
Symptoms
- Hybrid or check engine warning light
- Battery fan runs on a default setting
- Possibly reduced electric assist
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0AB1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.