P0AB0
Hybrid/EV Battery Pack Air Temperature Sensor A Circuit Intermittent/Erratic
P0AB0 flags a battery air temperature sensor A signal that jumps faster than real air temperature can change, usually a sign of a loose contact rather than a dead sensor. No manufacturer documents this exact code publicly; GM's two-mode and 2013 tables for sensor A only list the low, high and plausibility codes. GM does describe the method for the analogous cell sensor code P0A9F: the controller adds up the absolute signal changes over a 10-sample window and fails it when the sum exceeds a limit, 4 of 5 windows, Type B. CARB requires hybrid temperature inputs to be checked for such faults. Wiggle-test harness and connector at the inlet duct while watching live data before replacing the sensor.
Possible causes
- Loose or corroded contact at the inlet air sensor connector high
- Wire chafed through at the duct, intermittently touching ground medium
- Electrical interference on the sensor line low
Symptoms
- Hybrid warning light that comes and goes
- Inlet air reading jumps in live data
- Battery fan speed changes without obvious reason
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0AB0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.