OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AA9

Hybrid/EV Battery Voltage Isolation Sensor Circuit Low

P0AA9 reports that the isolation sensor signal sits below its valid window, typically because the sense line or the measuring input is pulled toward ground or has lost its supply. GM's 2016 and 2019 tables flag it when the sensor reads under 5 V with the bias switch open in 320 of 400 samples (about 5 s), Type B, two trips; the 2013 GM table uses a negative mid-pack reading under 5 V with contactors closed. Mitsubishi includes P0AA9 in its 2018 Outlander PHEV sub-BMU campaign together with P0AA7 and P0AA8, where noise caused false setting. The high counterpart is P0AAA. A low reading is a measuring fault, not proof of an insulation leak; that is P0AA6. Expect warnings and possibly reduced power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / A9

Possible causes

  • Isolation sense line shorted to ground or open input high
  • Failed isolation measuring circuit in the battery controller medium
  • Controller software misreading electrical noise (update available on some models) low

Symptoms

  • Check engine and EV system warning lights
  • Reduced power or speed limit on some models

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AA9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication