OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AA3

Hybrid/EV Battery Negative Contactor Circuit

The negative main contactor switches the negative pole of the traction battery onto the propulsion bus; together with the positive contactor it isolates the pack completely when the car is off. P0AA3 is the general code for this contactor circuit when the fault is not reported more precisely as stuck closed (P0AA4), stuck open (P0AA5) or a control-circuit fault (P0ADD to P0AE0). No manufacturer documents this exact code publicly; GM, Audi, Jeep and Mitsubishi publish the specific siblings. Contact damage from heat and arcing, as described in NHTSA's Mach-E recall query, is the usual background. Expect a hybrid or EV warning and possibly no ready mode; diagnosis belongs to a high-voltage trained workshop.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / A3

Possible causes

  • Negative contactor or battery junction box worn or damaged high
  • Fault in the contactor coil wiring or connector medium
  • Battery controller driver or software fault low

Symptoms

  • Vehicle does not enter ready mode
  • Hybrid or EV system warning with check engine light
  • Charging may be refused

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AA3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication