OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0AA1

Hybrid/EV Battery Positive Contactor Circuit Stuck Closed

P0AA1 means the positive main contactor conducts although it should be open, typically because its contacts have welded. GM checks this with all contactors commanded open for over 120 s (or the bus already below 9 % of pack voltage): more than 30 V on the positive bus in 4 of 6 samples sets Type B (two trips, 19OBDG02). Older GM programs test during precharge instead and set Type A after one trip if bus voltage exceeds 80 % (2011) or 60 % (2016) of pack voltage. GM bulletins cover the 2017 Bolt EV and welded contactors on the 2019 Volt; Jeep fixes false sets on the 2023 Grand Cherokee 4xe with software, Mitsubishi lists it as main contactor (+) seizure on the i-MiEV. The car may refuse to start.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / A1

Possible causes

  • Positive contactor contacts welded, e.g. after high current or arcing high
  • Battery or hybrid controller software (GM Volt 2019, Jeep 4xe updates) medium
  • Faulty battery disconnect unit (GM Bolt EV bulletin) medium
  • Bus voltage sensing error making an open contactor look closed low

Symptoms

  • Vehicle will not switch into ready or propulsion-active mode
  • Check engine light and service high voltage system message
  • Often stored together with P0AA4 or a slow discharge code such as P0C76

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0AA1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication