P0A99
Hybrid/EV Battery Pack Cooling Fan 2 Control Circuit Low
P0A99 reports a short to ground on the control circuit of the second battery cooling fan. No manufacturer documents this exact code publicly; Ford's two-fan Escape/Mariner Hybrid packs show that a second fan exists (there with P0A96). CARB requires the outputs used for battery thermal management to be monitored for circuit faults. The fan 1 counterpart P0A84 shows the usual GM logic: with the fan commanded at low duty, an output voltage below about 0.26 V in 16 of 20 samples sets a Type B code. The same approach is to be expected for fan 2. With the output held low the fan may not respond, cooling capacity falls and power may be limited. Open and high faults are P0A96 and P0A9A.
Possible causes
- Fan 2 control wire shorted to ground high
- Internal short in fan 2 control input medium
- Moisture or corrosion in the fan 2 connector low
Symptoms
- Check engine or hybrid warning
- Fan 2 does not run when commanded
- Reduced hybrid power in hot conditions
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0A99
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.