P0A96
Hybrid/EV Battery Pack Cooling Fan 2 Control Circuit/Open
Some packs use two cooling fans; P0A96 reports an open or general fault in the control circuit of the second one. Ford documents it code-exact: on 2005–12 Escape Hybrid and 2006–11 Mariner Hybrid the traction battery control module may store P0A96, often together with P0A81 for fan 1, and the repair is to replace both high-voltage battery fans with a kit (about 3 hours, pack removal included). Ford notes the code alone usually causes no noticeable symptom. CARB requires the electronic outputs used for battery thermal management to be monitored. Short-circuit faults on fan 2 are P0A99 and P0A9A. If one fan fails, cooling capacity drops and power may be limited in heat.
Possible causes
- Fan 2 motor or electronics failed (Ford replaces both fans) high
- Loose connector or broken wire to fan 2 medium
- Blown fan fuse low
Symptoms
- Code found during other diagnosis, often no complaint
- Check engine or hybrid warning
- Reduced hybrid power in hot conditions
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A96
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.