OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A95

High Voltage Fuse A

P0A95 means the battery management detects that a fuse in the high-voltage circuit has opened, usually by comparing the voltage before and after the fuse. Several makers document it: Jaguar for the I-PACE battery energy control module, where a shorted high-voltage auxiliary component blows fuses in the junction box and battery module; Porsche for the Taycan as the main high-voltage fuse with a vehicle that will not become ready to drive; Volvo, whose procedure compares the voltage after the fuses with pack voltage; and Audi, which found an intermittent false entry in hard cornering fixed by software. P0E2F and P0E30 cover fuses B and C. Mostly the car cannot be driven until the cause is found.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 95

Possible causes

  • Short circuit in a high-voltage auxiliary component (e.g. compressor, heater) high
  • Fuse opened after overload or ageing medium
  • Faulty voltage measurement or software misdetection in the battery control module low

Symptoms

  • Vehicle not ready to drive, propulsion warning
  • MIL or yellow warning lamp
  • Climate compressor or heater inoperative

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A95

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication