P0A94
DC/DC Converter A Performance
P0A94 reports that a DC/DC converter in the high-voltage system does not perform as commanded. In Toyota hybrids this is the boost converter inside the inverter assembly, which raises the battery voltage before it reaches the motor inverters. Toyota documents P0A94 for 2010–2015 Prius and 2012–2017 Prius v together with P0A1A, P324E and P3004 (bulletin T-SB-0003-21): the cause is damage in the inverter with converter, and the repair depends on the detail code. Recalls 14V-053 and 18V-684 address transistors in the intelligent power module that could overheat; the car then enters a fail-safe mode with reduced power. Not to be confused with the 14 V power module codes P0A86 to P0A8F.
Possible causes
- Damaged power transistors in the boost converter / inverter assembly high
- Thermal stress from insufficient inverter cooling medium
- Outstanding recall or software update not performed medium
Symptoms
- MIL, hybrid system and other warning lamps
- Fail-safe mode with greatly reduced power
- Vehicle may stop and not restart
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A94
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.