P0A91
Drive Motor B Performance
P0A91 is set when the second electric drive motor (motor B) of a hybrid or electric vehicle does not deliver the expected speed or torque, although no electrical circuit fault is detected. Motor B exists only on systems with two traction motors, such as power-split or dual-motor layouts. CARB requires hybrid OBD systems to monitor electric motor performance. No manufacturer documents this code publicly; GM's tables describe the motor A equivalent P0A90 as a comparison between motor speed and a reference speed, which illustrates the approach. Causes range from inverter or resolver faults to mechanical damage. The vehicle usually limits power or enters a reduced mode. P0A79 covers inverter B performance.
Possible causes
- Inverter B fault limiting motor current medium
- Motor position sensor (resolver) signal error medium
- Mechanical damage to motor B or its gearing low
Symptoms
- Hybrid/EV system warning and MIL
- Reduced power or limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A91
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.