P0A8F
14 Volt Power Module System Performance
P0A8F means the 14 V power module (DC/DC converter for the 12 V network) does not perform as expected even though its signals are electrically in range. GM's 2013 eAssist tables use it as a correlation test: with the APM commanded on and ignition voltage 9 to 32 V, the APM's own low-voltage reading and the run/crank voltage measured by the controller must agree within 4.5 V. A larger difference over 3.75 s in a 5 s window sets the code as Type B, two trips to MIL. A high resistance in the 12 V output path or ground, a drifting sensor or a converter that cannot hold its target can all cause this. P0A8D and P0A8E cover sensor circuit low/high faults.
Possible causes
- High resistance in 12 V output cable, fuse link or ground high
- Drifting voltage sensor in the module medium
- Converter unable to hold its target voltage medium
Symptoms
- MIL and charging/hybrid warning
- Low or fluctuating 12 V voltage
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A8F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.