P0A8E
14 Volt Power Module System Voltage High
P0A8E signals too high a voltage at the 14 V power module, the DC/DC converter supplying the 12 V side. In GM's 2013 eAssist tables it is the circuit-high check of the APM low-voltage sensor: a reading above 20 V for 1.5 s within a 2 s window, with ignition voltage 9 to 32 V, sets the code, and it passes below 19.5 V. GM rates it Type B, so the MIL comes on after two failing trips. Since the network should sit around 14 V, a reading over 20 V usually means a sense line shorted to a higher potential or a faulty sensor; a genuinely over-regulating converter would also threaten bulbs and modules. P0A8D is the low counterpart, P0A8F compares the sensor with the ignition voltage.
Possible causes
- Voltage sense line shorted to a higher potential high
- Voltage sensor inside the power module failed medium
- Converter regulating its output too high low
Symptoms
- MIL and charging/hybrid warning
- Very bright lights or failing bulbs if overvoltage is real
- Converter may be shut down
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A8E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.